Discuss operations
Define the business objective, occupancy needs, opening date, and decision-makers.
Commercial
Salon & Spa Renovation in Ottawa
Build a refined client experience around treatment flow, specialized services, lighting, cabinetry, finishes, and day-to-day operations.
Ideal forBusiness Owner, Commercial Property Owner, Commercial Tenant
Typical active construction3–6 weeksPlanning, landlord or authority approvals, procurement, and active construction are separate phases. Occupied and phased work may require a longer schedule.
DeliveryPlanned and managed by Meiju
4.3 on GoogleBased on 11 public reviews
Fully insuredDocumentation available
WSIB coveredProfessional jobsite coverage
Ottawa basedServing Ottawa and nearby areas
A refined service environment that works behind the scenes.
Meiju reviews the operating requirements, building constraints, approvals, and desired opening or occupancy date before defining the work. Trades, finishes, inspections, and handoff are managed against that operational objective.
Meiju plans this work for Ottawa owners, operators, and property managers, with practical attention to business continuity, site access, sequencing, permits, and accessibility where they apply.
The work must respect operations
- The space must support a defined business or occupancy objective.
- Access, approvals, phasing, and operating constraints need early review.
- You want one accountable delivery path through operational handoff.
What clients want addressed
- Client and staff flow
- Plumbing-intensive stations
- Task and ambient lighting
- Storage and cabinetry
- Cleanable finishes
- Opening readiness
What matters most in salon & spa renovation
It coordinates plumbing-intensive stations, lighting, storage, cleanable finishes, client comfort, and a polished service environment.
How it works
From operating requirements to handover
Review the site
We assess building rules, access, systems, safety, and operating constraints.
Define the project
Scope, phasing, budget, approvals, and key selections are brought into one plan.
Build and hand over
Meiju manages delivery, inspections, closeout, and operational handoff.
Complete Scope
Explore the complete scope.
Review the work that can be included. Final scope is confirmed after assessing the property, existing conditions, and project priorities.
91
Documented scope items
Included scopePlanning & Project Coordination
6 items
Site Assessment
Reviews the property, existing conditions, access, and project goals to define the work required.
Project Planning
Organizes the proposed scope, sequence, schedule, and key project requirements.
Design Consultation
Reviews layout, function, finishes, and design priorities with the client.
Material Procurement
Coordinates the sourcing, ordering, and delivery planning of project materials.
Permit Assistance
Helps identify permit needs and coordinate the documents and submission steps within the agreed scope.
Project Management
Coordinates scheduling, trades, site communication, progress, and project administration.
Included scopeProperty Protection & Cleanup
7 items
Selective Demolition
Carefully removes only the identified finishes, fixtures, or non-structural components while protecting surrounding areas.
Interior Demolition
Removes interior finishes, fixtures, and non-structural assemblies within the project area.
Floor Removal
Removes the existing floor finish and accessible associated materials.
Ceiling Removal
Removes the ceiling finish or non-structural ceiling assembly and prepares the area for the next stage.
Wall Removal
Removes an non-load-bearing wall and related finishes within the project area.
Debris Removal
Collects and removes non-hazardous construction debris generated by the agreed work.
Construction Cleaning
Removes construction dust and debris and cleans accessible surfaces in the completed work area.
Included scopeFraming & Structural
4 items
Interior Wall Framing
Builds non-load-bearing interior and basement wall framing with required openings for the layout.
Ceiling Framing
Builds or adjusts ceiling framing and required backing for the planned finished assembly.
Bulkhead Framing
Builds a framed enclosure around ducts, pipes, beams, or other building elements.
Structural Reinforcement
Adds framing, posts, blocking, or other structural components to strengthen an existing assembly.
Included scopeInsulation & Building Envelope
3 items
Batt Insulation
Installs batt insulation in prepared wall, floor, or ceiling cavities.
Soundproofing
Installs acoustic insulation or sound-control materials within a prepared assembly.
Vapour Barrier Installation
Installs and seals an vapour-control membrane over a prepared insulated assembly.
Included scopePlumbing
15 items
Plumbing Rough-In
Installs or modifies concealed water, drain, and vent connections for the layout.
Plumbing Repair
Diagnoses and repairs accessible plumbing components.
Water Line Installation
Installs or extends an water supply line and required connections.
Drain Installation
Installs or extends an drain and related connections.
Drain Cleaning
Clears an accessible blocked or slow drain and confirms normal flow.
Faucet Installation
Installs and connects a faucet, then checks operation and accessible connections for leaks.
Sink Installation
Installs and connects a sink, drain, and water supply components.
Toilet Installation
Installs and connects a toilet, then tests flushing and accessible seals.
Vanity Installation
Installs and secures a bathroom vanity and coordinates its accessible connections.
Bathtub Installation
Installs and connects a bathtub in a prepared area.
Shower Installation
Installs and connects the shower base, enclosure components, and accessible plumbing fixtures.
Shower Door Installation
Installs and adjusts a shower door or enclosure on a prepared opening.
Water Heater Installation
Installs and connects a storage water heater and completes basic startup checks.
Tankless Water Heater Installation
Installs and connects a tankless water heater and completes basic startup checks.
Shut-Off Valve Replacement
Removes an accessible shut-off valve and installs and tests a replacement.
Included scopeElectrical
14 items
Electrical Rough-In
Installs or modifies concealed wiring, boxes, and connection points for the planned layout.
Electrical Repair
Diagnoses and repairs accessible electrical components.
Electrical Panel Upgrade
Replaces or upgrades an electrical panel and coordinates circuit connections.
Circuit Installation
Installs a new electrical circuit from the panel to the required connection point.
Outlet Installation
Installs and connects an electrical outlet in a prepared location.
Switch Installation
Installs and connects an switch or control in a prepared location.
Pot Light Installation
Installs and connects recessed light fixtures in prepared ceiling locations.
Light Fixture Installation
Installs and connects a light fixture at a prepared electrical location.
Ceiling Fan Installation
Installs, secures, and connects a ceiling fan at a prepared location.
Exhaust Fan Installation
Installs and connects a exhaust fan and venting where included.
Smoke & CO Detector Installation
Installs and tests smoke and carbon monoxide detection equipment.
Thermostat Installation
Installs and configures a thermostat for the existing HVAC system.
Interior LED Light Strip Installation
Installs and connects a LED light strip system at a prepared interior location.
Cabinet LED Light Installation
Installs and connects LED lighting at prepared cabinets or millwork.
Included scopeHVAC
6 items
HVAC Rough-In
Installs or modifies concealed ducts, lines, vents, and HVAC connection points.
HVAC Repair
Diagnoses and repairs accessible HVAC components.
Duct Installation
Installs or extends ductwork to serve the required area.
Dryer Vent Installation
Installs an dryer exhaust duct and exterior termination.
Cold Air Return Installation
Installs or extends a cold-air return and connects it to ductwork.
HRV Installation
Installs and connects a heat recovery ventilator and associated duct connections.
Included scopeDrywall & Finishes
9 items
Drywall Installation
Installs drywall panels on prepared wall or ceiling framing.
Moisture Resistant Drywall
Installs moisture-resistant drywall on prepared framing in damp-area locations.
Drywall Finishing
Tapes, compounds, sands, and prepares drywall joints and fasteners for paint or another finish.
Drywall Repair
Repairs damaged drywall and prepares the affected area for finishing.
Ceiling Repair
Repairs localized ceiling damage and prepares the surface for the selected finish.
Interior Painting
Prepares and paints the interior walls, ceilings, trim, or other selected surfaces.
Trim Painting
Prepares and paints selected baseboards, casing, moulding, or other trim.
Ceiling Painting
Prepares and paints the selected interior ceiling surface.
Wall Skimming
Applies a thin finishing coat to smooth an uneven or damaged wall surface.
Included scopeFlooring
14 items
Vinyl Flooring
Installs selected vinyl plank, tile, or sheet flooring over a prepared substrate.
Laminate Flooring
Installs selected laminate flooring and underlayment over a prepared substrate.
Hardwood Flooring
Installs selected solid hardwood flooring over a suitable prepared substrate.
Engineered Hardwood Flooring
Installs selected engineered hardwood over a suitable prepared substrate.
Tile Flooring
Installs and grouts selected floor tile over a properly prepared substrate.
Carpet Installation
Installs selected carpet and underpad in the area.
Floor Levelling
Corrects low spots or uneven areas to create a suitable surface for new flooring.
Underlayment Installation
Installs the underlayment over a prepared substrate.
Subfloor Installation
Installs subfloor panels over prepared framing or an base.
Floor Tile Installation
Installs and grouts selected floor tile over a prepared substrate.
Wall Tile Installation
Installs and grouts selected tile on a prepared wall surface.
Shower Tile Installation
Installs and grouts selected tile over a prepared shower waterproofing system.
Tile Repair
Repairs or replaces localized damaged tile and restores the surrounding grout.
Tile Regrouting
Removes deteriorated surface grout where required and applies new grout to selected joints.
Included scopeDoors & Trim
10 items
Interior Door Installation
Installs, aligns, and adjusts an interior door and hardware.
Door Repair
Repairs and adjusts door, frame, or hardware components to restore normal operation.
Baseboard Installation
Installs and prepares selected baseboard trim at finished wall and floor transitions.
Trim Installation
Installs and prepares selected casing, moulding, or finish trim.
Shelving Installation
Installs and secures shelving with supports suited to the wall and intended use.
Closet Installation
Installs closet shelving, rods, organizers, or related components.
Cabinet Installation
Installs, aligns, and secures prefabricated cabinets.
Countertop Installation
Installs and secures an countertop on prepared cabinets or supports.
General Carpentry
Completes non-structural woodwork, adjustments, and small carpentry tasks.
Crown Moulding Installation
Installs and prepares crown moulding at the wall and ceiling transition.
Included scopeExterior & Structural
3 items
Bathroom Demolition
Removes the bathroom fixtures, finishes, and assemblies.
Tile Removal
Removes existing tile, grout, and accessible setting material from the selected area.
Cabinet Removal
Removes existing cabinets and accessible attachments while protecting adjacent surfaces.
Questions
Before you begin
Detailed answers are here when you need them. Open a question to learn more.
What is included in this service?
Work can include Selective Demolition, Interior Demolition, Bathroom Demolition, Floor Removal, Ceiling Removal, and Wall Removal. The final proposal confirms the selected services, quantities, site conditions, and any exclusions for your property.
How long does the work usually take?
A ready-to-start basic-to-standard scope typically takes 3–6 weeks. Site conditions, selections, permits, inspections, weather, access, and approved changes can affect the schedule.
Can the salon or spa remain partly open during construction?
Possibly, when clients can be safely separated from dust, noise, tools, utility work, and affected service areas. Shutdowns and health-related operating requirements may require full closure for specific stages.
How is pricing calculated?
Pricing is built from the selected services using hourly, project-based, per-square-foot, and per-room rates, as applicable to the measured scope. Design-dependent or concealed work may require a custom quotation. The final proposal confirms quantities and approved choices.
How are plumbing-heavy stations planned before cabinetry is built?
Fixture specifications, hot-water demand, drainage, venting, shutoffs, electrical needs, clearances, and cabinet drawings are coordinated before rough-ins and fabrication proceed.
Which finishes hold up best around colour, water, and cleaning products?
Selections should consider staining, moisture, chemicals, slip resistance, heat, cleanability, repairability, and manufacturer limitations for the actual service area.
Site review
Tell us about the site and operating requirements.
Share the space, business objective, operating constraints, and desired timing so we can prepare for the site review.
We review the request before proposing work.
We’ll recommend the appropriate scope and next step.
No obligation and no mailing-list signup.