Confirm the handoff date
Share access, vacancy timing, inspection notes, and the required readiness standard.
Property Care
Rental Turnover Services in Ottawa
Move efficiently between tenants with coordinated repairs, cleaning, replacements, inspections, and readiness work in one clear scope.
Ideal forProperty Manager, Landlord, Real Estate Investor
Typical readiness window2–5 business daysVacancy, access, material availability, and discovered repairs affect readiness. The target handoff date is confirmed after review.
DeliveryPlanned and managed by Meiju
4.3 on GoogleBased on 11 public reviews
Fully insuredDocumentation available
WSIB coveredProfessional jobsite coverage
Ottawa basedServing Ottawa and nearby areas
A clean, repaired, inspection-ready unit by the next occupancy date.
Meiju works backward from the occupancy or listing date, prioritizes readiness-critical items, and brings repairs, cleaning, and finishing together under one handoff standard. The result is fewer last-minute calls and repeat visits.
Available across Ottawa and the surrounding service area, this service is planned around property access, occupant needs, seasonal timing, and the condition found on site.
A firm handoff date is approaching
- A listing or occupancy date is approaching.
- Repairs, cleaning, and finish work must be organized together.
- You want one readiness standard and final handoff.
What clients want addressed
- Required occupancy date
- Inspection deficiencies
- Cleaning and repairs
- Locks and fixtures
- Access coordination
- Readiness confirmation
The occupancy date is a project constraint, not a suggestion.
It prepares a unit for the next occupant by coordinating cleaning, repairs, finish touch-ups, and access-critical tasks against a firm leasing date.
How it works
Work backward from the handoff date
Triage the property
We separate deadline-critical work from optional improvements and later capital needs.
Plan the readiness scope
Repairs, cleaning, materials, and access are sequenced around the available window.
Complete and hand over
We close the confirmed list and document anything requiring follow-up.
Complete Scope
Explore the complete scope.
Review the work that can be included. Final scope is confirmed after assessing the property, existing conditions, and project priorities.
47
Documented scope items
Included scopePlanning & Project Coordination
4 items
Site Assessment
Reviews the property, existing conditions, access, and project goals to define the work required.
Project Planning
Organizes the proposed scope, sequence, schedule, and key project requirements.
Material Procurement
Coordinates the sourcing, ordering, and delivery planning of project materials.
Project Management
Coordinates scheduling, trades, site communication, progress, and project administration.
Included scopeProperty Protection & Cleanup
5 items
Debris Removal
Collects and removes non-hazardous construction debris generated by the agreed work.
Construction Cleaning
Removes construction dust and debris and cleans accessible surfaces in the completed work area.
Deep Cleaning
Provides detailed cleaning of the rooms, fixtures, and accessible surfaces.
Property Cleanup
Collects debris and cleans the interior or exterior property areas.
Junk Removal
Collects, loads, and removes non-hazardous unwanted items from the property.
Included scopePlumbing
4 items
Plumbing Repair
Diagnoses and repairs accessible plumbing components.
Drain Cleaning
Clears an accessible blocked or slow drain and confirms normal flow.
Faucet Installation
Installs and connects a faucet, then checks operation and accessible connections for leaks.
Toilet Installation
Installs and connects a toilet, then tests flushing and accessible seals.
Included scopeElectrical
5 items
Electrical Repair
Diagnoses and repairs accessible electrical components.
Outlet Installation
Installs and connects an electrical outlet in a prepared location.
Switch Installation
Installs and connects an switch or control in a prepared location.
Light Fixture Installation
Installs and connects a light fixture at a prepared electrical location.
Exhaust Fan Installation
Installs and connects a exhaust fan and venting where included.
Included scopeDrywall & Finishes
5 items
Drywall Repair
Repairs damaged drywall and prepares the affected area for finishing.
Ceiling Repair
Repairs localized ceiling damage and prepares the surface for the selected finish.
Interior Painting
Prepares and paints the interior walls, ceilings, trim, or other selected surfaces.
Trim Painting
Prepares and paints selected baseboards, casing, moulding, or other trim.
Ceiling Painting
Prepares and paints the selected interior ceiling surface.
Included scopeFlooring
5 items
Vinyl Flooring
Installs selected vinyl plank, tile, or sheet flooring over a prepared substrate.
Laminate Flooring
Installs selected laminate flooring and underlayment over a prepared substrate.
Carpet Installation
Installs selected carpet and underpad in the area.
Tile Repair
Repairs or replaces localized damaged tile and restores the surrounding grout.
Tile Regrouting
Removes deteriorated surface grout where required and applies new grout to selected joints.
Included scopeDoors & Trim
7 items
Door Repair
Repairs and adjusts door, frame, or hardware components to restore normal operation.
Window Repair
Corrects localized window damage, drafts, failed perimeter seals, hardware issues, and other repairable defects without requiring full replacement.
Baseboard Installation
Installs and prepares selected baseboard trim at finished wall and floor transitions.
Trim Installation
Installs and prepares selected casing, moulding, or finish trim.
Shelving Installation
Installs and secures shelving with supports suited to the wall and intended use.
Closet Installation
Installs closet shelving, rods, organizers, or related components.
General Carpentry
Completes non-structural woodwork, adjustments, and small carpentry tasks.
Included scopeGeneral Repairs
12 items
General Repairs
Completes a defined group of minor, non-specialized repairs within the scope.
Furniture Assembly
Assembles and positions ready-to-assemble furniture according to its instructions.
TV & Picture Mounting
Locates suitable supports and securely mounts televisions, pictures, or similar wall-hung items.
Blind & Curtain Installation
Installs and adjusts blinds, curtain rods, or window-covering hardware.
Grab Bar Installation
Installs and securely anchors grab bars at prepared or suitable locations.
Weatherstripping Replacement
Removes failed weatherstripping and installs a replacement around an door or window.
Door Hardware Replacement
Removes existing door hardware and installs and adjusts replacement components.
Lock Installation
Installs and adjusts a lockset or deadbolt on a suitable door.
Caulking & Sealing
Removes failed sealant where included and applies new caulking at joints and transitions.
Minor Drywall Repair
Patches small drywall holes or localized damage and prepares the area for paint.
Minor Plumbing Repairs
Completes small repairs to accessible plumbing fixtures or connections.
Minor Electrical Repairs
Completes small repairs to accessible electrical devices or connections.
Questions
Before you begin
Detailed answers are here when you need them. Open a question to learn more.
What is included in this service?
Work can include Debris Removal, Drywall Repair, Ceiling Repair, Interior Painting, Trim Painting, and Ceiling Painting. The final proposal confirms the selected services, quantities, site conditions, and any exclusions for your property.
How long does the work usually take?
A ready-to-start basic-to-standard scope typically takes 2–5 business days. Site conditions, selections, permits, inspections, weather, access, and approved changes can affect the schedule.
Can repairs and cleaning be handled under one turnover scope?
Yes. Repairs and finish touch-ups are sequenced before final cleaning so completed areas are not disturbed again. Larger deficiencies remain separately identified.
How is pricing calculated?
Pricing is built from the selected services using hourly, project-based, per-item, and per-square-foot rates, as applicable to the measured scope. The final proposal confirms quantities and approved choices.
How quickly can a unit be prepared for the next tenant?
Timing depends on access, inspection findings, repair quantities, cleaning condition, materials, and regulated work. We confirm the achievable readiness date after reviewing the unit and list.
Can you work from a move-out inspection report?
Yes. The report should identify locations and required standards, and photos are helpful. We verify site conditions and distinguish tenant-damage items from capital or pre-existing work where possible.
Property readiness
Tell us the handoff date and current condition.
Share the vacancy or occupancy date, inspection findings, and the readiness standard you need.
We review the request before proposing work.
We’ll recommend the appropriate scope and next step.
No obligation and no mailing-list signup.